Is it safe to use a broken motorcycle throttle body? The answer, of course, is no. Therefore, maintenance of the motorcycle throttle valve is critical. Why do motorcycle throttle bodies need to be cleaned?
What is motorcycle throttle body?
Why do motorcycle throttle bodies need to be cleaned?
Does cleaning motorcycle throttle body have an impact?
What is motorcycle throttle body?
1. Your engine is a giant air pump. External air enters through the inlet at the front of the vehicle and then through the engine air filter element. This helps remove dust and debris from the combustion chamber and causes problems. The air then flows through the pipe to the throttle. The throttle controls the flow of air into the engine, and the component that houses and works with the throttle is called the throttle body.
2. A few years ago, there would have been a carburetor where the throttle body was. The carburetor also measures the amount of air entering the combustion chamber, but it also serves a second purpose: it mixes air and gasoline into a fine mist. Modern engines inject fuel directly into the combustion chamber via fuel injectors, so the throttle body only needs to work as a valve, allowing air to pass through.
Why do motorcycle throttle bodies need to be cleaned?
While the air filter element does remove solids, there's still a lot of stuff under the hood that can cause mucus to form and hinder smooth throttle operation. Mechanics will use a solvent spray and sometimes a brush to remove the goo and release the throttle, allowing it to work freely.
Does cleaning motorcycle throttle body have an impact?
1. Dirt, carbon, and dirt can build up in the enclosure, causing airflow problems. Called coking, the normally smooth air travel service becomes sticky and unbalanced. This interrupts the perfect mixing of air and fuel, which can cause the butterfly valve to jam.
2. While throttle body cleaning is good for preventative car maintenance, it should also contribute to engine drivability. In fact, if you notice an unsteady idle, wobbly initial acceleration or even stalling -- all of which happen when the engine is fully warmed up -- a dirty throttle body could be the culprit.
Cleaning the throttle body is much easier than changing the oil. If you can follow simple instructions and press the button on the spray can, you can do it yourself. If you are looking for a motorcycle throttle valve of good quality at a reasonable price, Wenzhou Runtong Motor Vehicle Parts Co., Ltd. is a very good choice
219 Times Road, Luofeng North Industrial Park, Tangxia Town, Wenzhou City, Zhejiang Province, China
Subscribe Now
You can contact us any way that is convenient for you. We are available 24/7 via fax or email. You can also use a quick contact form below or visit our office personally.