Bigness
Intake Side Inner length : 20MM
Intake Side Outside length : 30MM
Outlet Side Inner length : 27MM
Outlet Side Outside length : 32MM
Attention : Please confirm whether the size of your product is consistent with the size of the product we sell before purchasing, please confirm before purchasing.
Exchange Part Number
21W-14101-00-00
21W-14101-01-00
1RY-14101-02-00
Product Advantage
The production of our pw80 carburetor stems from passion and dedication to motorcycle parts. As a specialist supplier, we strive to meet your needs, whether you are an ATV,Dirt Bike,moped or scooter owner.If you want to have the highest quality aftermarket products, then we are your best choice.
How To Solve Carburetor Oil Spill
1. Fuel leaks after installing a new bw80 carburetor are usually caused by old debris in the tank going down into the conical float valve inside the carburetor and preventing it from closing/sealing properly.
2. The second possibility is to connect the fuel line to the wrong port on the Y-zinger 80 carburetor.
3. The third possibility is that the float valve assembly is defective. The float (filled with air) inside the big wheel 80 carburetor may have a small factory made hole and have absorbed the gasoline. In addition, the seals on the cone may be deformed and fail to seal.
4. The fourth possibility is the engine carburetor Angle. Therefore, you need to adjust the float level.
5. The most common float related problem is that the float level is set too high at the factory. This can lead to getting stuck on rough terrain and disappearing when it comes to a stop.
Suitable For
Yamaha PW80 PW 80 Y-Zinger Motorcycle Dirt Bike 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006
Yamaha BW80 BW 80 Big Wheel Dirt Bike 1986 1987 1988 1989 1990